#!/bin/sh
# Linux client with NetworkManager: WiFi, then the same for a wired port.
nmcli connection add type wifi con-name Home ifname '*' ssid Home \
  wifi-sec.key-mgmt wpa-eap 802-1x.eap tls 802-1x.identity anonymous \
  802-1x.ca-cert /etc/pki/home/root_ca.crt \
  802-1x.domain-match radius.home.example \
  802-1x.client-cert /etc/pki/home/laptop1.crt \
  802-1x.private-key /etc/pki/home/laptop1.key \
  802-1x.private-key-password-flags not-required \
  802-1x.phase1-auth-flags tls-1-3-enable

nmcli connection add type ethernet con-name wired-8021x ifname eth0 \
  802-1x.eap tls 802-1x.identity anonymous \
  802-1x.ca-cert /etc/pki/home/root_ca.crt \
  802-1x.domain-match radius.home.example \
  802-1x.client-cert /etc/pki/home/laptop1.crt \
  802-1x.private-key /etc/pki/home/laptop1.key \
  802-1x.private-key-password-flags not-required \
  802-1x.phase1-auth-flags tls-1-3-enable